Benefits of Using Certified Technicians for Oil Change Services


Oil changes are an important part of vehicle maintenance. Our service center provides expert oil change services with certified technicians. No matter your vehicle type, we have the knowledge to handle it. We use high-quality oils and filters to keep your engine clean and lubricated.

During the oil change, our technicians inspect other components like the filter, belts, hoses, and fluids. This helps us spot any potential issues quickly.
We prioritize professional service and customer satisfaction. That’s why we’re a reliable destination for routine maintenance.

Fun Fact: Regular oil changes can extend a vehicle’s lifespan, according to Carfax.

The Importance of Regular Oil Changes

Oil changes are key for your car’s performance and life. Clean oil lubricates the engine, decreasing friction and avoiding damage to its components. So, changing the oil regularly helps the engine run smoothly and economically, lowering fuel costs and avoiding pricey repairs.

Also, regular oil changes keep the environment cleaner. Over time, contaminants like dirt, dust, and sludge can build up and reduce the oil’s ability to keep the engine clean. Changing the oil regularly eliminates these contaminants and stops them from circulating in the engine.

Plus, oil changes can discover potential issues early on. During an oil change, certified technicians inspect the car for signs of damage or wear. That way, they can find any problems before they get too serious and leave you stranded or with a costly fix.

As a tip, follow your car manufacturer’s oil change schedule. Different cars have different needs, so check your owner’s manual or ask a professional technician to figure out how often you should change your oil depending on your driving habits and conditions.

By doing regular oil changes with certified technicians, you’re not just guaranteeing optimal engine performance but also prolonging your car’s life and helping keep the environment clean. Don’t overlook this easy yet vital maintenance job—it’ll pay off in the end.

Benefits of Using Certified Technicians for Oil Change Services

To ensure a smooth and reliable oil change experience, turn to certified technicians. With their expertise and training, knowledge of specific car models, and access to quality tools and equipment, they offer a comprehensive solution. Discover the benefits each sub-section brings, including the assurance of a job well done and optimized performance for your vehicle.

Expertise and Training

Expertise and training are musts for oil change services. Certified techs possess the skills and knowledge to do the job efficiently and effectively. Their know-how allows them to address any complications that could arise during the process, giving customers a smooth experience.

To show the importance of expertise and training in oil change services, let’s look at key aspects covered by certified techs:


Knowledge of Oil Types
Familiarity with Car Models
Understanding Filters

Certified techs understand different types of oils, both conventional and synthetic. This knowledge lets them select the best oil for a vehicle, making sure it performs well and keeps engine health.

Also, they familiarize themselves with various car models, so they can do an oil change regardless of the make or model of a vehicle. This skill eliminates guesswork and gives customers peace of mind.

Another point where expertise is necessary is understanding filters. These trap contaminants and keep oil clean. Certified techs know about filters and when to replace them with the oil change. They help extend engine life and better performance by replacing filters on time.

To make your oil change experience even better, consider these tips:

  1. Regular Maintenance: Check your vehicle’s maintenance schedule to have timely oil changes. This helps engine performance and prevents future issues.
  2. Seek Certified Technicians: Get certified technicians who have been through rigorous training and got certifications. Their expertise and up-to-date knowledge guarantee a professional oil change service.
  3. Clarify Concerns: If you have any worries or questions about your vehicle’s oil change, ask the certified technician. They can answer your queries and provide useful advice.

By following these tips, you can make sure your vehicle gets top-notch oil change services from certified techs. Their expertise and training will help maintain engine health and extend its lifespan, saving you from expensive repairs in the future.

Knowledge of Specific Car Models

Certified technicians need to be aware of essential car model details, such as oil viscosity, filter type, and drain plug size. This information allows them to guarantee a reliable and effective oil change service. Have a professional mechanic at JNT Automotive check and change your oil and filters.

In the US, there are 278 million registered passenger vehicles. It’s vital for technicians to have extensive knowledge of specific car models when performing oil changes.

Having this knowledge not only ensures an efficient service, but it also helps technicians to identify any model-specific issues or maintenance requirements. They can alert the vehicle owners about potential problems or suggest additional services to optimize the car’s performance.

Access to Quality Tools and Equipment

Certified technicians have the benefit of specialized tools made specifically for oil change services. They know which high-quality products to use. This helps them work quickly and accurately diagnose potential problems. Quality tools enable precision work, leading to enhanced customer satisfaction.

It’s no surprise that top-notch tools are essential for certified techs. This evolution has revolutionized the automotive industry. In 1923, basic hand tools were used for oil changes, but as vehicles became more complex, so did the tools. Specialty wrenches, oil filter removal tools, and electronic diagnostic equipment changed oil changes forever.

Now, technicians have the advantage of advanced tools and equipment. Investing in quality tools is key for better oil change services.

Step-by-Step Guide to Expert Oil Change Service

To ensure a seamless oil change experience, follow this step-by-step guide. Prepare before the oil change, drain the old oil, remove and replace the oil filter, add the new oil, and finally, check for leaks and proper oil level. This systematic approach guarantees that your oil change service by certified technicians is performed with expertise and precision.

Preparations before the Oil Change

To have a smooth and efficient oil change service, it is essential to prepare the car properly. Follow these steps:

  1. Get the tools and materials needed, like a wrench, drain pan, funnel, new oil filter and the correct oil type & amount. Having them ready saves time.
  2. Park the vehicle on a level surface for accurate oil level measurement & easy access to the drain plug & oil filter. Use ramps if needed.
  3. Start the engine to warm it up. Drive or idle for 5 mins to raise the temperature.
  4. Put safety first by engaging the parking brake & using wheel chocks. Wear protective gloves & eyewear too.

These steps ensure a safe & hassle-free oil change experience. By following them, you can do a professional job. Do not take shortcuts or neglect the preparations. This may lead to costly repairs or engine damage. So dedicate enough time to preparatory tasks, for an enjoyable DIY activity like changing oil!

Common Mistakes to Avoid During an Oil Change

Performing an oil change is a must for vehicle owners. But people often make mistakes that can cause problems. To have a successful oil change, it is important to know the common errors and how to avoid them.

  • Using the wrong type of oil: Each car has particular oil requirements. Using different viscosity or grade can damage the engine.
  • Over-tightening the drain plug: Tightening the drain plug too much can strip the threads or damage the oil pan.
  • Not changing the oil filter: The oil filter helps remove contaminants from engine oil. Not replacing it can lead to clogged filters and lack of engine performance.
  • Ignoring manufacturer’s recommendations: Every vehicle manufacturer provides guidelines for oil changes. Ignoring these can result in engine wear and less fuel efficiency.
  • Filling too much or too little oil: It is essential to put the right amount of oil. Too much or too little can cause pressure or inadequate lubrication respectively.
  • Reusing old gaskets: Always use new gaskets or O-rings when replacing the drain plug or filter. Reusing them can cause leaks.

Refer to your vehicle’s manual and maintain proper procedures. Taking the time to learn can save you from future problems and repairs.

Approximately 20% of drivers in the U.S. don’t follow the manufacturer’s recommendations for oil changes. This can have bad effects on engine performance and life. That’s why proper oil change maintenance is so important.

By avoiding mistakes and knowing your vehicle’s needs, you can properly perform oil changes and keep your engine in top condition. Have a professional mechanic at JNT Automotive check and change your oil and filters.

Frequency of Oil Changes and Recommended Maintenance Schedule

It’s essential to follow the guidelines of experts for oil changes and maintenance. Doing this ensures long-lasting performance and optimal function of your vehicle.

Here’s a table outlining the suggested frequency:

Vehicle Type Oil Change Frequency

  • Passenger Cars Every 5,000 – 7,500 miles
  • SUVs Every 5,000 – 7,500 miles
  • Trucks Every 3,000 – 5,000 miles

Plus, consider other factors such as driving conditions and type of oil used. Harsh driving or synthetic oil may need more frequent oil changes.

To keep your vehicle in top condition:

  1. Check fluid levels often. Low levels can cause damage.
  2. Inspect hoses and belts regularly.
  3. Monitor tire pressure.
  4. Follow manufacturer’s recommendations.

Proactive maintenance saves time and money. Take care of your car, and it’ll take care of you!


Our certified technicians provide an expert oil change service like no other. They use only top-quality products and equipment to deliver exceptional service.

During your appointment, our technicians will replace your old oil. Plus, they’ll inspect your vehicle for any potential issues or concerns.

They’ll also give personalized recommendations based on your vehicle’s needs. They’ll inform you on the type of motor oil suitable and how often to schedule an oil change.

Benefit from our expert oil change service. Trust our certified technicians and prolong your vehicle’s lifespan. Improve fuel efficiency and prevent costly repairs. Book an appointment today and see the difference. Your vehicle deserves the best care!

Have a professional mechanic at JNT Automotive check and change your oil and filters.

Frequently Asked Questions

An expert oil change service refers to the process of replacing the old oil in a vehicle’s engine with fresh, clean oil, performed by skilled and certified technicians.

Certified technicians have undergone extensive training and possess the knowledge and skills to perform oil changes accurately and efficiently. They are familiar with various vehicle models and can ensure the correct type and amount of oil is used.

The frequency of oil changes depends on several factors, including the type of oil used, driving conditions, and the vehicle manufacturer’s recommendations. As a general guideline, most vehicles require an oil change every 3,000 to 5,000 miles or every three to six months.

Regular oil changes help maintain the overall health and longevity of your vehicle’s engine. They improve engine performance, enhance fuel efficiency, reduce friction and wear, prevent engine overheating, and remove dirt and contaminants from the engine.

While it is possible to perform an oil change yourself, it is recommended to have it done by certified technicians. They have the necessary tools, equipment, and expertise to ensure the oil change is done correctly and safely.

The duration of an oil change service can vary depending on factors such as the type of vehicle, the accessibility of the oil filter and drain plug, and any additional services requested. Typically, an oil change takes about 30 minutes to an hour.

Scroll to Top